VALX E2! energy axle

E2 Energy axle

  • Turn motion into power
  • Reduce fuel consumption
  • 20 Amps optimal battery charging
  • Fully independent from truck
  • Integrated brushless high efficiency generator
  • Less downtime because of low batteries
  • No connecting cables, truck adaptions or long power leads required
  • No trailer adaptions required
  • Innovative Battery Charge Indicator Unit
     

SUITABILITY
When used for charging batteries of a typical tail lift, the following rule of thumb can be used: To compensate the power consumption of one movement of a laden tail lift up and down you will need to drive the distance of about 1.5 km at a speed higher than 20 km/h

CHARGING SYSTEM
Suitable for all flooded lead-acid batteries. Adapted software for other types of batteries are available on request 

NOMINAL BATTERY CAPACITY
The E2! system is optimized for lead-acid batteries with a capacity of 120Ah @ 24 Volt. Smaller or larger capacities are allowed, however for charging batteries with a capacity smaller than 70Ah: please consult VALX bv
 

Nominal current output 20 Amp
Increased current output The nominal current output can be multiplied by adding additional
E2! Power Modules in parallel
Voltage 24 Volt nominal. Max. system voltage 28.6 Volt
Alternative voltage 48 Volt nominal (2 E2! Power modules connected in series)
Additional weight 17 kg (excluding cable & indicator box)
Max. operating speed 105 Km/h
Operating temperatures -20˚C to +50˚C
Direction of travel Operates in both directions (forward + backward)
Approval According to BS EN 50498:2010 (UN 10 rev.3) CE
Max. power input at full load 650W
Max. power input when trickle charging 50W

 

CHARGING CURRENT IN AMPERE

WHEN EQUIPPED WITH TIRES
435/50R19.5 

WHEN EQUIPPED WITH TIRES
385/65R22.5
5 Amp  > 17.0 Km/h  > 19.5 Km/h
10 Amp  > 29.8 Km/h  > 34.1 Km/h
15 Amp  > 42.6 Km/h  > 48.7 Km/h
20 Amp  > 55.4 Km/h  > 63.3 Km/h